1. CSS font shorthand rule
When styling fonts with CSS you may be doing this:
There’s no need though as you can use this CSS shorthand property:
font: bold italic small-caps 1em/1.5em verdana,sans-serif
Much better! Just a few of words of warning: This CSS shorthand version will only work if you’re specifying both the font-size and the font-family. The font-family command must always be at the very end of this shorthand command, and font-size must come directly before this. Also, if you don’t specify the font-weight, font-style, or font-variant then these values will automatically default to a value of normal, so do bear this in mind too.
2. Two classes together
Usually attributes are assigned just one class, but this doesn’t mean that that’s all you’re allowed. In reality, you can assign as many classes as you like! For example:
Using these two classes together (separated by a space, not with a comma) means that the paragraph calls up the rules assigned to both text and side. If any rules overlap between the two classes then the class which is below the other in the CSS document will take precedence.
3. CSS border default value
When writing a border rule you’ll usually specify the colour, width and style (in any order). For example, border: 3px solid #000 will give you a black solid border, 3px thick. However the only required value here is the border style.
If you were to write just border: solid then the defaults for that border will be used. But what defaults? Well, the default width for a border is medium (equivalent to about 3 to 4px) and the default colour is that of the text colour within that border. If either of these are what you want for the border then you can leave them out of the CSS rule!
4. CSS document for printing
Lots of web pages have a link to a print-friendly version. What many of them don’t realise is that there’s no need because you can set up a second CSS document to be called up when a user prints the page.
So, your page header should contains links to two CSS documents, one for the screen, and one for printing:
The first line of code calls up the CSS for the screen (notice the inclusion of media=”screen”) and the second line calls up the CSS for the printable version (using media=”print”).
So, what commands should you put in this second CSS document? To work it out, open a blank document and save it as printstyle.css. Next, point the screen CSS command to this document so that the command reads: href=”printstyle.css” media=”screen” />.
Now just keep entering CSS commands until the display on the screen matches how you want the printed version to look. You’ll certainly want to make use of the display: none command for navigation, decorative images and non-essential items. For more advice on this, read Print Different, which also mentions the other media for which you can specify CSS files.
5. Image replacement technique
It’s always advisable to use regular HTML markup to display text, as opposed to an image. Doing so allows for a faster download speed and has accessibility benefits. However, if you’ve absolutely got your heart set on using a certain font and your site visitors are unlikely to have that font on their computers, then really you’ve got no choice but to use an image.
Say for example, you wanted the top heading of each page to be ‘Buy widgets’, as you’re a widget seller and you’d like to be found for this phrase in the search engines. You’re pretty set on it being an obscure font so you need to use an image:
This is OK but there’s strong evidence to suggest that search engines don’t assign as much importance to alt text as they do real text (because so many webmasters use the alt text to cram in keywords). So, an alternative would be:
Now, this obviously won’t use your obscure font. To fix this problem place these commands in your CSS document:
background: url(widget-image.gif) no-repeat;
height: image height
Be sure to change “image height” to whatever the height of the image is (e.g. 85px)! The image, with your fancy font, will now display and the regular text will be safely out of the way, positioned 2000px to the left of the screen thanks to our CSS rule. Please note, this can cause accessibility issues as any user with images turned off won’t be able to see the text.
6. CSS box model hack alternative
The box model hack is used to fix a rendering problem in pre-IE 6 browsers on PC, where by the border and padding are included in the width of an element, as opposed to added on. For example, when specifying the dimensions of a container you might use the following CSS rule:
This CSS rule would be applied to:
This means that the total width of the box is 150px (100px width + two 5px borders + two 20px paddings) in all browsers except pre-IE 6 versions on PC. In these browsers the total width would be just 100px, with the padding and border widths being incorporated into this width. The box model hack can be used to fix this, but this can get really messy.
A simple alternative is to use this CSS:
And the new HTML would be:
Perfect! Now the box width will always be 150px, regardless of the browser!
7. Centre aligning a block element
Say you wanted to have a fixed width layout website, and the content floated in the middle of the screen. You can use the following CSS command:
margin: 0 auto
You would then enclose around every item in the body of the HTML document and it’ll be given an automatic margin on both its left and right, ensuring that it’s always placed in the centre of the screen. Simple… well not quite – we’ve still got the pre-IE 6 versions on PC to worry about, as these browsers won’t centre align the element with this CSS command. You’ll have to change the CSS rules:
margin: 0 auto
This will then centre align the main content, but it’ll also centre align the text! To offset the second, probably undesired, effect we inserted text-align: left into the content div.
8. Vertically aligning with CSS
Vertically aligning with tables was a doddle. To make cell content line up in the middle of a cell you would use vertical-align: middle. This doesn’t really work with a CSS layout. Say you have a navigation menu item whose height is assigned 2em and you insert this vertical align command into the CSS rule. It basically won’t make a difference and the text will be pushed to the top of the box.
Hmmm… not the desired effect. The solution? Specify the line height to be the same as the height of the box itself in the CSS. In this instance, the box is 2em high, so we would insert line-height: 2em into the CSS rule and the text now floats in the middle of the box – perfect!
9. CSS positioning within a container
One of the best things about CSS is that you can position an object absolutely anywhere you want in the document. It’s also possible (and often desirable) to position objects within a container. It’s simple to do too. Simply assign the following CSS rule to the container:
Now any element within this container will be positioned relative to it. Say you had this HTML structure:
To position the navigation exactly 30px from the left and 5px from the top of the container box, you could use these CSS commands:
Perfect! In this particular example, you could of course also use margin: 5px 0 0 30px, but there are some cases where it’s preferable to use positioning.
10. Background colour running to the screen bottom
One of the disadvantages of CSS is its inability to be controlled vertically, causing one particular problem which a table layout doesn’t suffer from. Say you have a column running down the left side of the page, which contains site navigation. The page has a white background, but you want this left column to have a blue background. Simple, you assign it the appropriate CSS rule:
Just one problem though: Because the navigation items don’t continue all the way to the bottom of the screen, neither does the background colour. The blue background colour is being cut off half way down the page, ruining your great design. What can you do!?
Unfortunately one of the only solutions to this is to cheat, and assign the body a background image of exactly the same colour and width as the left column. You would use this CSS command:
background: url(blue-image.gif) 0 0 repeat-y
This image that you place in the background should be exactly 150px wide and the same blue colour as the background of the left column. The disadvantage of using this method is that you can’t express the left column in terms of em, as if the user resizes text and the column expands, it’s background colour won’t.
Using this method the left column will have to be expressed in px if you want it to have a different background colour to the rest of the page.